Bike Rack - GM (19420400)

Details

• Brand:

  

• SKU:

  19420400

• Other Names:

  Roof Carrier, Seasuckerandreg; Bomber 2-Bike

• Description:
  • Holds 2 bicycles – up to 45 lbs. each
  • Features 4 powerful vacuum cups
  • Versatile design allows for roof top, trunk or hatchback attachment
  • Easily mounts to metal, glass or fiberglass surfaces
  • ¾-inch thick high-density polyethylene (HDPE) body for strength and durability
  • A 27-inch x 8-inch footprint weighing approximately 12 lbs.
  • Kit includes: Mini Bomber 2-Bike Rack, (2) HUSKE universal fork mounts with 9mm plugs, (2) 22-inch rear wheel straps (can accommodate most fat bike tires) with 6-inch SeaSucker® vacuum mount, spare SeaSucker® pump, (2) crank arm straps (prevents pedals from contacting roof) and 5g lube tube for vacuum pump maintenance] and installation instructions. Additional plug sizes available from SeaSucker®
  Transport 2 bicycles quickly and easily with the Chevrolet Accessories Vacuum-Mounted 2-Bike Mini Bomber Bicycle Carrier by SeaSucker®. This versatile 2-bike fork-mount rack easily attaches to metal, glass or fiberglass surfaces using 4 powerful vacuum cups, which allow the rack to be quickly attached on your vehicle’s roof top, trunk or hatchback. Built from 3/4-inch thick high-density polyethylene (HDPE) for strength and durability, the Mini Bomber’s body is designed to flex to conform to your vehicle’s curves. Capable of safely transporting 2 bicycles up to 45 lbs. (each) and designed for easy installation and removal. This is a standalone carrier that does not require a roof rack or trailer hitch system. The Vacuum-Mounted 2-Bike Mini Bomber Bicycle Carrier by SeaSucker® weighs approximately 12 lbs., and is built on a 27-inch x 8-inch footprint. The 2 integrated HUSKE Universal Fork Mounts with 9mm plugs and quick release skewers make it easy to secure your bicycle’s front fork to the Mini Bomber. Two rear 6-inch SeaSucker® vacuum mounts with integrated rear wheel straps are also included to help secure your bicycles. Additionally, each system ships complete with a 5g lube tube for vacuum pump maintenance, a spare vacuum pump and two crank arm straps.
  
  

  Frequently Asked Questions
  Q: How long will my SeaSucker® hold?
  A: It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it and other factors. Smoother, flatter surfaces are ideal. Clean your vehicle surfaces and SeaSucker® vacuum cups before attaching to help maximize hold time. The vacuum pump’s plunger will reverse itself and extend from the pump cylinder when it starts to lose power — the orange band indicates when it is time to repump. Check your bike rack before each use to ensure hold and stability.
  Q: How do I clean/maintain my vacuum mounts?
  A: Clean the vacuum pad with mild soap and a soft cloth or sponge. Make sure there is no dirt or debris on the sealing edge (the bottom outside edge) of the vacuum pad of the pad. Inspect the sealing edge for nicks or cuts – a nick or cut will allow air to leak under the cup reduce vacuum hold and should be replaced. Be sure to use the provided covers on vacuum pads when not in use. Clean your vacuum pump regularly, especially if it is exposed to salt water or used in a dusty environment. To clean the pump, pull the plunger straight out of the pump cylinder and wash with mild soap and a soft cloth or paper towel. Make sure you dry out the cylinder – water can cause a popping noise when pumped and may interfere with the check-valve function. The plunger should be wiped clean and the black rubber seal at the tip of the plunger re-lubed with a thin layer of silicone-based gel lubricant. Push the plunger back into the cylinder and pump it a few times to seal it properly and distribute the lubricant.
  Q: How do you remove a SeaSucker® rack once it’s attached?
  A: Using your finger, lift the edge of the vacuum cup away from the mounting surface by pulling the T-shaped tab on the top of the vacuum pad up and towards the center of the vacuum mount. Once the edge of the vacuum pad is lifted, the vacuum seal will break.
  Q: Will my SeaSucker® rack damage my car’s finish?
  A: No. Prior to installation clean your vehicle’s surface of dirt and debris. Do not attach SeaSucker® to a freshly-waxed surface until it’s had time to cure.
  Q: Can SeaSucker® be applied on surfaces with decal or a vehicle wrap?
  A: No. This product is designed to mount directly to metal, glass or fiberglass surfaces.
  Q: Will the sun damage my SeaSucker® rack?
  A: All SeaSucker® vacuum mounts have UV inhibitors built in. However, UV rays eventually break down almost any sort of rubber or plastic, so store your SeaSucker rack out of the sun when not in use.
  Q: How should I store my SeaSucker® rack when not in use?
  A: Put the cover back on the vacuum pad when not in use. Make sure to press the edge of the vacuum pad all the way into the cover to avoid warping.
  Q: Is it okay to use my rack in cold temperatures?
  A: Yes, but be aware that once you remove your rack after using it in the cold, you will have to warm it up again to near room temperature before the rubber is pliable enough to make a solid seal to the mounting surface.
  

• Condition: New